4130 Steel Pipes & Tubes ( Price 1.5 usd to 3 usd ) per kg
Standard – ASTM A519, AISI, ASME, AMS 6736, 6737
Sizes – 6 mm OD to 600 mm OD
Wall thickness – 0.5 mm to 50 mm
4130 Steel Sheets & Plates ( Price – 1.5 usd to 2.5 usd per kg )
Size Width – 100 mm to 3000 mm
Length – 100 mm to 12,000 mm
Thickness 0.5 mm to 50 mm
4130 Steel Round, Square Bars Price ( 1.5 usd to 3 usd per kg )
Size – 6 mm to 350 mm OD
4130 Steel Filler Wire Price – ( 2 usd to 5 usd per kg )
Size – 1 mm to 8 mm
4130 Steel Pipe Fittings, Flanges, Fasteners etc as per customer requirement.
Price Per Pcs as per customer requirements
| Element | Content (%) |
|---|---|
| Iron, Fe | 97.03 – 98.22 |
| Chromium, Cr | 0.80 – 1.10 |
| Manganese, Mn | 0.40 – 0.60 |
| Carbon, C | 0.280 – 0.330 |
| Silicon, Si | 0.15 – 0.30 |
| Molybdenum, Mo | 0.15 – 0.25 |
| Sulfur, S | 0.040 |
| Phosphorous, P | 0.035 |
| Properties | Metric | Imperial |
|---|---|---|
| Density | 7.85 g/cm3 | 0.284 lb/in³ |
| Melting point | 1432°C | 2610°F |
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength, ultimate | 560 MPa | 81200 psi |
| Tensile strength, yield | 460 MPa | 66700 psi |
| Modulus of elasticity | 190-210 GPa | 27557-30458 ksi |
| Bulk modulus (Typical for steel) | 140 GPa | 20300 ksi |
| Shear modulus (Typical for steel) | 80 GPa | 11600 ksi |
| Poissons ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at break (in 50 mm) | 21.50% | 21.50% |
| Reduction of area | 59.6 | 59.60% |
| Hardness, Brinell | 217 | 217 |
| Hardness, Knoop (Converted from Brinell hardness) | 240 | 240 |
| Hardness, Rockwell B (Converted from Brinell hardness) | 95 | 95 |
| Hardness, Rockwell C (Converted from Brinell hardness, value below normal HRC range, for comparison purposes only.) | 17 | 17 |
| Hardness, Vickers (Converted from Brinell hardness) | 228 | 228 |
| Machinability (Annealed and cold drawn. Based on 100% machinability for AISI 1212 steel.) | 70 | 70 |
